VU+ Zero 4k

What is VU+ Zero 4k?

Vu+ announced the Zero 4K at the Anga Cable and Satellite fair in May 2017, so naturally, people have been wondering what it is like, and if is a good entry point into the 4K satellite market.

So let’s take a look and find out.

vu+ zero 4k

Hardware: 

  • 1.5 GHz ARM Dual-Core Processor
  • 4GB Flash (eMMC)
  • 2GB DDR4 DRAM
  • LAN (10/100 MBit/s)
  • 1x Single DVB-S2X Multistream tuner (Single DVB-C version also available)
  • HDMI 2.0
  • HDR10/HLG support
  • 1x Common-Interface
  • 1x Smartcard-Reader (Xcrypt)
  • 1x USB 2.0
  • S/PDIF audio output optical (digital)
  • DiSEqC 1.0/1.1/1.2, USALS
  • External 12V power supply
  • Power Switch
  • Fanless Silent Operation

Inside the Zero 4K:

Looking inside the Zero 4K, at the rear left, is the single DVB-S2X tuner (or DVB-C tuner if you purchased that model instead). The tuners are fixed, so you cannot swap between them. The large black heatsink you can see on the right covers the Broadcom BCM 72604 1.5 GHz dual-core 7000 DMIPS ARM v7 CPU, the card slot and CI slot are on the left and they are inserted from the rear, as you can see, there is no space for an internal HDD in the Zero 4K.

VU+ zero 4k

How to setup IPTV on Enigma2 (DreamBox/Vu+ etc)

1- Download and install DCC or Putty

2- Open DCC or Putt

3- Typing host name : local ip address for box

4- Connection type setting : Telnet

5- Enter

6- Username and password entered ( user and pass : root )

7- Copy the command, m3u line we send you by email:   wget -O /etc/enigma2/iptv.sh “http://ourdns:port/get.php?username=XXX&password=XXX&type=enigma22_script&output=mpegts” && chmod 777 /etc/enigma2/iptv.sh && /etc/enigma2/iptv.sh

8- Paste it in DCC or Putty ssh

9- Enter / Wait for it to be installed

10- Restart the receiver

11- Go to your box “Favorites” and you should have a new bouquet.

Video Tutorial: Add Iptv to dreambox Or vu+ enigma2 steep 1

Ten articles before and after


Related Posts:

Leave a Comment